Split Multirests for Sibelius 4
Version 1.20
Added 01 Aug 2005 (last updated 19 Jun 2012)
For use with Sibelius 3.x, Sibelius 4 and Sibelius 4.1
Split Multirest uses hidden text objects to split multirests into smaller pieces, a specified number of bars into the multirest. You can split a multirest once or several times, and specify whether to split all multirests below a certain size, or to split all multirests above a certain size.
Fixed in v1.20 (2006-07-04):
- The plug-in was not calculating the size correctly for Multirests longer than n bars, which is now fixed.
- The plug-in disallowed splitting all multirests into single bars, which is now fixed.
Use this version on Sibelius 3 and 4. For Sibelius 5 and later, use Split Multirests.
- Download SplitMultirests.zip (7K, downloaded 26753 times)
Plug-in written by Bob Zawalich.
Narrow Two Voices
Added 01 Aug 2005 (last updated 17 Jun 2015)
For use with Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This plug-in controls the horizontal note offset in passages which use voice 1 and voice 2 simultaneously. There are three actions predefined (you can define and save more actions for yourself):
- Default Rules of Sibelius: This essentially behaves identically to Sibelius, but corrects some known problems: a unison of two semibreves shows now two noteheads, and so does a unison of e.g. a dotted minim and an undotted crotchet.
- Narrow Mode: In situations where voice 2 goes above voice 1, move the voice 2 notes to the left. This allows a more dense note typesetting and is used in particular in organ and piano music.
- Arpeggio Mode: If you have fast arpeggios running in voice 1 while voice 2 doubles the first note of each arpeggio with a longer note, it is common that the noteheads on the first beats are typeset overlapping.
To use the plug-in, make a passage selection (i.e. a single box), then choose Narrow Two Voices from the Plug-ins menu and follow the on-screen instructions.
Changes in v2.0 (updated 29 August 2005):
- Plug-in now requires use of the Preferences plug-in, so will only run in Sibelius 4
- Added wizard with three pre-defined modes, to select your job with two clicks
- Added font metrics for Helsinki font
- improved offset mechanism for several combinations of dotted/undotted notes
Changes in v1.20 (updated 17 November 2004):
- Now possible to force noteheads to overlap, even if their shape differs (useful for arpeggio-like passages where the first note is played with longer notes in a second voice)
- Added fixes for the positioning of unison semibreves and dotted notes in one voice at the same pitch as undotted notes in another
- Added a full set of user options
- Download NarrowTwoVoices.zip (14K, downloaded 28244 times)
Plug-in written by Hans-Christoph Wirth.
Make Layout Uniform
Version 02.64.00
Added 01 Aug 2005 (last updated 24 Jun 2012)
For use with Sibelius 3.x
This is an updated version of the plug-in supplied with Sibelius 3. It has the following improvements over the existing version:
- clearer user interface for setting breaks on pages correct breaks used
- faster (screen redraw turned off)
- ability to unlock formatting
- much improved handling of multirests in extracted parts (new in v2.20.2).
- ability to automatically insert system breaks at rehearsal marks (new in v2.60.01)
- option to ignore pick-up (upbeat) bars (new in v2.60.01)
- pick-up bars are now defined to be irregular bars that are either the first bar in the score, the first bar in the selection, or are irregular bars that have bar number changes (such as pick-up bars created by Create > Time Signature). This allows the ignoring of pick-ups in the middle of multi-song scores (new in v2.64)
- A new option to break on special barline (such as double and final barlines) has been added.
For Sibelius 5, use the shipping version of this plugin
- Download MakeLayoutUniform.zip (10K, downloaded 26875 times)
Plug-in written by Bob Zawalich.
Split Bar
Version 01.20.00
Added 31 Aug 2005 (last updated 24 Jun 2012)
For use with Sibelius 4 and Sibelius 4.1
This plug-in automates several of the steps needed to split a bar into smaller pieces. It can be used to split a bar at the end of a system, or to break a bar into pieces to simulate mid-bar repeat barlines, or to split a bar into 3 pieces.
To use it, select the note that you want the bar to split before, or make a passage selection to split before and after the selection.
In Sibelius 5, use the shipping version of this plugin.
You will most likely have some cleaning up to do after the plug-in runs.
The plug-in will rewrite the bar, adding several time signatures. You will probably want to delete the new time signatures - select and delete them and click No if asked to rewrite.
If you use the Final split breaks system option, the plug-in will add a system break before the final split bar, and (in Sibelius 4 only), a bar number change to the final split bar. You may want to hide that bar number change. You may also want to change the barline of the first split bar to be hidden, since the plug-in cannot do that.
New in version 1.20:
- In Sibelius 4.1 or later, bar number changes added to split bars will be automatically hidden.
For Sibelius 5, use the shipping version of this plugin.
- Download SplitBar.zip (10K, downloaded 26822 times)
Plug-in written by Bob Zawalich.
Split Multirests
Version 01.60.00
Added 06 Oct 2007 (last updated 29 May 2018)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Breaks up multirests at various intervals using true split multirest breaks (the previous version used hidden text).
Updated June 7, 2008 to allow multirests to be split before and after irregular bars
Updated February 7, 2009 to add a separate option to split all multirests and to allow totals notification to be inhibited.
Use this version for Sibelius 5 and later. For Sibelius 3 and 4, use Split Multirests for Sibelius 4.
Updated 28 May 2018. Fixes and improvements.
- Download SplitMultirests.zip (9K, downloaded 27421 times)
Plug-in written by Bob Zawalich.
Create Blank Page
Version 01.02.00
Added 14 Dec 2007 (last updated 02 Mar 2018)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Adds one or more blank pages before or after a selection. (This is somewhat redundant because it just adds a Special Page Break, but it avoids having to select a barline and is comparable to Create Title Page).
Updated 3 March 2018. Fixed bug that might happen if using a multiple selection where items were selected out of chronological order.
- Download CreateBlankPage.zip (3K, downloaded 27374 times)
Plug-in written by Bob Zawalich.
Time Signature For Irregular Bars
Version 01.85.00
Added 13 Apr 2008 (last updated 16 Nov 2022)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__Adds a time signature appropriate to the length to an irregular bar, so that irregular bars are made regular. It can also trace the locations of irregular bars. __It also puts an appropriate time signature into the following *regular* bars where this is required. Its goal is to end up with a score where every bar has a size that matches an explicit time signature. __It will not always spell the time signature correctly (it only looks at the length of a bar, not the notes it contains). The lowest denominator is 4, so it will not generate 3/2 or 2/2, but other than that, it picks the simplest fraction, so it will always choose 3/4 over 6/8 and 6/4 over 12/8. __If there is no initial time signature, it will add one. __Updated 20 March 2011 to add an option to choose 6/8 rather than 3/4 and 12/8 over 6/4. __Updated 6 February 2012 to add option to use cautionary accidentals - on by default. __Updated 16 November 2022. Version 01.85.00. General cleanup and improvement of code. Added ability to removed added time signatures when they are no longer needed. This plugin will now run only in Sibelius 6.2 or later.- Download TimeSigForIrregularBars.zip (17K, downloaded 1543 times)
Plug-in written by Bob Zawalich.
Merge Bars
Version 01.50.00
Added 29 Jul 2008 (last updated 28 Aug 2014)
For use with Sibelius 5 and Sibelius 6
Merges adjacent bars into a single larger bar.
It requires a passage (blue box) selection of at least 2 bars. Any unselected portions of the first and last bars selected will be split off as separate bars.
Any blank pages attached to barlines that are merged will be lost.
It can draw barlines where the barlines were, but their spacing must be adjusted manually. It can also reset bar numbering in the following bars.
One use is to simulate tuplets crossing a barline. Merge 2 bars so the tuplet crosses the former barline, then draw in a barline.
For Sibelius 7 and later, Merge Bars ships with Sibelius and is invoked from Home-Bars-Join. Use the shipping version rather than installing this plugin (which is an earlier version).
- Download MergeBars.zip (7K, downloaded 26754 times)
Plug-in written by Bob Zawalich.
Change Selected Barlines
Version 01.07.00
Added 07 Jan 2009 (last updated 03 Dec 2022)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__Adds a barline of a specified type to each bar in the selection, thus allowing multiple barlines to be changed at once. __It offers a special barline type called Default, which resets the barline in selected bars to the default barline type as defined in Engraving Rules. This is usually, but not always Normal. Normal adds in a Special Barline of type Normal, which is also what Create Barline in Sibelius does. __Updated 7 August 2009 to work with individually selected barlines as well as passage selections of bars __ Updated 24 August 2009 to fix problems with individual barlines __Updated 19 April 2021. Version 01.06.00. Improvements to handling of hiding dialog. __Updated 3 December 2022. Version 01.07.00. Changed dialog layout.- Download ChangeSelectedBarlines.zip (5K, downloaded 1488 times)
Plug-in written by Bob Zawalich.
Resize Bar
Version 01.36.00
Added 22 Aug 2009 (last updated 05 Feb 2018)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Changes the length of selected bars by a fixed amount (e.g., a quarter note/crotchet) or to a given size, including the size of the current time signature. This will change the affected bars to be irregular bars in most cases.
Updated 24 August 2009 to fix some error handling code
Updated 26 August 2009 to fix problems with special barlines
Updated 11 August 2011 to change Shrink to Fit to remove both leading and trailing rests, to simplify its use for pickup bars. Sib 6 or later required.
Updated 3 December 2011 for compatibility with Sib 7 version.
Use the shipping version of this plugin for Sibelis 7 or later.
- Download ResizeBar.zip (22K, downloaded 27425 times)
Plug-in written by Bob Zawalich.
Trace Internal Bar Numbers
Version 01.02.00
Added 01 Oct 2009 (last updated 07 Mar 2014)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
The bar numbers you see in a score (the external or displayed bar numbers) may not reflect the consecutive ordering of the bars. So you may have bars numbered 0 (for a pickup), 1, 2, then 1 again, 2, 3, then 10, 11, 12� in an extreme case. You could at least restart bar numbers as a section break.
Sibelius keeps an internal or consecutive bar number as well so that each bar has a unique and consecutive number. If your score has any bar number changes, the internal and external bar numbers are most likely different.
Note that in the General Pane of the Properties Window, the bar number displayed is the external number (it reflects bar number changes) while the page numbers displayed are internal page numbers (they do not reflect page number changes).
In Sibelius 6.1, the new Manual Repeats Playback feature (in Play � Repeat) requires that internal bar numbers be used.
This plugin writes the internal and external bar numbers of selected bars to the Trace window.
Updated 3 October 2009 to show range of selected bars for a passage selection.
- Download TraceInternalBarNumbers.zip (3K, downloaded 27233 times)
Plug-in written by Bob Zawalich.
Export Document Layout Style
Version 01.11.00
Added 05 Feb 2010 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Creates a text file in the (newly created) user Document Layout Styles folder containing Document Layout, Music Font, and Engraving Rules settings (all of them that are available to a plugin) from the current score.
The created file can be used by other plugins (such as Import Document Layout Style) to import these properties, similar to importing House Styles.
Updated 22 October 2010 to include score and part name and whether the generating score was a part.
Updated 9 August 2011 for Sib 7 user file location compatibility
- Download ExportDocLayoutStyle.zip (6K, downloaded 27392 times)
Plug-in written by Bob Zawalich.
Import Document Layout Style
Version 01.65.00
Added 05 Feb 2010 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Imports selected properties from previously created (by the Export Document Layout Style plugin) Document Layout Styles files into the currently active score.
Properties include staff size, page size, and margin settings.
Requires Sibelius 6.1
Updated 13 July 2010 to fix incorrect interactions with page margins fields.
Updated 22 October 2010 to read updated file format and allow import into parts.
Updated 9 August 2011 for Sib 7 user file location compatibility
- Download ImportDocLayoutStyle.zip (17K, downloaded 27401 times)
Plug-in written by Bob Zawalich.
Split Score Into Movements
Version 01.15.00
Added 05 May 2010 (last updated 29 May 2018)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This plugin requires Sibelius version 6.2
Splits the current score into a number of separate movement scores, based on the location of bars marked as Section Ends. There are options to break if the section end is followed by Title or Subtitle text.
The movement scores will be named using a base file name plus the numbers 1, 2, 3,...
Updated 28 December 2012. Fixed bugs. Can now handle path and file names with periods and will ask to create a folder that does not already exist.
Updated 28 May 2018. Bug Fixes.
- Download SplitScoreMovements.zip (11K, downloaded 27646 times)
Plug-in written by Bob Zawalich.
Tidy Appended Scores
Version 1.1
Added 21 May 2010 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This plug-in is designed to be run after appending one score to the end of another via File > Append Score. Appending scores can require a number of small fixes to things like the final barline, cautionary time signatures, redundant key changes, duplicate text, and so on.
To use this plug-in, first append the scores together, then run the plug-in, and choose the additional items you want to hide or delete in the dialog that appears. Help text is provided for each type of item.
Update for v1.1: Allows common and alla breve time signatures. (Previously these were being replaced by 4/4 and 2/2.)
- Download TidyAppendedScore.zip (5K, downloaded 27622 times)
Plug-in written by Neil Sands.
Import House Style History
Version 05.01.00
Added 14 Jun 2010 (last updated 19 Oct 2020)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Imports a House Style into the currently open score (a close imitation of House Styles - Import House Style), and appends the name of the imported House Style to the Score Info - More Information field to act as a record of imported House Styles.
It will optionally add the current date to the Score Info data.
Updated 9 May 2012 to respace dialog for Sib 7.
- Download ImportHouseStyleHistory.zip (6K, downloaded 27404 times)
Plug-in written by Bob Zawalich.
Resize Bar for Sibelius 5
Version 01.25.00
Added 26 Apr 2011 (last updated 24 Jun 2012)
For use with Sibelius 5
Changes the length of selected bars by a fixed amount (e.g., a quarter note/crotchet) or to a given size, including the size of the current time signature. This will change the affected bars to be irregular bars in most cases. Updated 24 August 2009 to fix some error handling code Updated 26 August 2009 to fix problems with special barlines For Sibelius 6 and later use the Resize Bar plugin- Download ResizeBar.zip (17K, downloaded 26668 times)
Plug-in written by Bob Zawalich.
Convert Two Staves Piano
Version 01.03.00
Added 09 May 2011 (last updated 01 Aug 2014)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Given 2 selected adjacent, single-staff instruments, it will convert them into a single grand staff instrument (piano, harp, marimba, or harpsichord, your choice).
Useful for Photoscore or other conversions where you end up with not exactly real pianos.
Converted staves are in the same score location as the original staves.
Updated 12 October 2012 to add option to not delete the original staves.
Updated 1 August 2014 to allow it to run in Sib 5. In Sib 5, the new grand staff will always be placed at the bottom of the score, instead of at the position of the original staves.
- Download ConvertTwoStavesPiano.zip (5K, downloaded 27510 times)
Plug-in written by Bob Zawalich.
Delete Special Normal Barlines
Version 01.04.00
Added 14 Aug 2011 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This plugin removes Special Barlines whose type is "Normal". These barlines are often created to replace other special barlines, such as double barlines, but have the undesirable side effect of splitting multirests.
Deleting these barlines will, in almost all cases, cause no visual change (except in multirests), as the default barline, which is almost always a single barline, will now be visible.
- Download DeleteSpecialNormalBarlines.zip (3K, downloaded 27160 times)
Plug-in written by Bob Zawalich.
Delete Empty Staves
Version 01.55.00
Added 04 Sep 2011 (last updated 29 May 2018)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Deletes and/or traces staves in a score that contain no notes. This could be useful if you start a score from a template and end up not using some of the instruments.
It can process a single score, all open scores, or a folder of scores.
This plugin is dedicated to Derek Bourgeois, who had need of such a thing.
Updated 24 Oct 2011 to repair some minor control focus issues in the main dialog.
Updated 18 January 2013 to correct typos in dialog
Updated 28 May 2018. Bug fixes
- Download DeleteEmptyStaves.zip (11K, downloaded 27507 times)
Plug-in written by Bob Zawalich.
Map Hide Empty Staves
Version 01.02.00
Added 28 Sep 2011 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
For each staff in the score tells which bars (if any) are hidden due to Hide Empty Staves
- Download MapHideEmptyStaves.zip (4K, downloaded 27154 times)
Plug-in written by Bob Zawalich.
Empty Staves
Version 01.03.00
Added 28 Sep 2011 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Tells whether selected staves contain notes or not. It will report whether the staves are Not empty (visible notes), Not empty (notes, but all are hidden), Totally empty (no notes, bar rests only), or Partially empty (no notes, but rests, text, lines, symbols possible)
This could be useful if you have a template score where some staves may be unused but it would take a long time to look at the entire staff to figure out if there are notes present.
- Download EmptyStaves.zip (3K, downloaded 27218 times)
Plug-in written by Bob Zawalich.
Import House Style To Manuscript Paper
Version 01.12.01
Added 26 Oct 2011 (last updated 23 Apr 2022)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x and Sibelius 21.x
****Imports a House Style into a Manuscript Paper file, creating or modifying a user copy of the Manuscript Paper file. It does not change the shipping version of the Manuscript Paper.++++ ****After importing the House Style, files created with File - New will include the House Style information.++++ ****There is an option dialog which allows you to specify which elements of the House Style are to be imported.++++ ****In Sib 6, File New will have access to the MS paper immediately after running the plugin. In Version 7 and later (you will need at least version 7.0.3), you will need to restart Sibelius to have access to the modified manuscript papers.++++ ****Updated 3 March 2012 to remove duplicate names in Sib 7.++++ ****Updated 7 February 2017 to show folder names and ship/user status of MS Papers so it reflect subfolder use in Sib 7.1.3 and later++++ ****Updated 19 October 2020. Version 01.12.00. Post Sib 2020.1 the plugin can import Document Settings and Engraving Rules separately. There are both imported by default but you can change the setting in the Options dialog.++++ ****Updated 23 April 2022. Version 01.12.01. Sib 2022.3 changed how MS papers are stored and the plugin can no longer access the files. This plugin is disabled, and will no longer appear in the plugin installer in 2022.3 or later++++- Download ImportHouseStyleToManuscriptPaper.zip (10K, downloaded 27274 times)
Plug-in written by Bob Zawalich.
Delete Title Page
Version 01.05.00
Added 01 Jan 2012 (last updated 07 Mar 2014)
For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Deletes "special page break"-style title pages, or lets you change the number of additional blank pages associated with a title page.
- Download DeleteTitlePage.zip (4K, downloaded 27774 times)
Plug-in written by Bob Zawalich.
Tidy After Conversion
Version 01.17.00
Added 21 Feb 2012 (last updated 22 May 2018)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Tidy After Conversion undoes some things that convertors like MusicXML and Photoscore do to retain the original appearance of a score. It can unlock the formatting and reset the staff spacing, which changes the original layout but makes it easier to do your own layout.
Reset clef positions fixes a problem where clef changes at the end of a bar end up over the barline in Photoscore conversions.
Photoscore forces every visible accidental to be cautionary, so it will not disappear even if another note with the same accidental is added before it in a bar. Remove forced accidentals resets accidentals to behave as if you had entered them by hand.
Updated 18 Feb 2013. Added option to fix initial system key signatures in certain situations. Photoscore sets all key sigs to one staff only, so if the intitial key sigs for all staves are one-staff-only, the plugin will set the initial system key signature to the key signature used by notation staves, if they are all the same. It also fixes an odd case when the staves are not one-staff-only but the initial system key signature does not match the key sig in the staves.
Updated 30 April 2014 to add Optimize Staff Spacing, Reset Position and Reset Design.
Updated 16 May 2014 to include system objects when processing entire score
Updated 21 May 2018 to add flag to allow plugin to run without its dialog so it can be run better under Run Plugin On Score and Parts.
- Download TidyAfterConversion.zip (11K, downloaded 27436 times)
Plug-in written by Bob Zawalich / Jeremy Hughes.
Page Size Score and Parts
Version 01.71.00
Added 06 Mar 2012 (last updated 01 Sep 2023)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__Changes the Document Layout page size for a score and/or all its parts. This can be useful for scores created by MIDI and Photoscore imports where the parts might be created as A4 when the score is Letter. __Changing page size will also reset the page margins to their default values. __The plugin can also trace the page size and units of any scores. The plugin can run on the current score, all open scores, or a folder of scores. __Updated 28 June 2016. Fixed bug where the page size was always set to Letter. __Updated 31 August 2023. Version 01.71.00. Updated to work with score subsets.- Download PageSizeScoreAndParts.zip (9K, downloaded 1093 times)
Plug-in written by Bob Zawalich.
Beam 3 Eighths In Common Time
Version 01.10.00
Added 12 Mar 2012 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Changes the beaming of consecutive 8th notes/quavers in common time (4/4 or C).
This only affect groups of 3 notes and a rest that start on beat 1 or beat 3, and have the rest as the first or last member of the group.
The plugin can beam the 3-8th notes together, or split 3 beamed notes into rest/single note/2 beamed notes or 2 beamed notes/single note/rest.
It should work correctly whether beam to/from rests is on or off. This plugin requires a passage (box) selection of full bars.
Updated 15 March 2012 to add ability to trace changed beam groups.
- Download Beam3EighthsInCommon.zip (6K, downloaded 27262 times)
Plug-in written by Bob Zawalich.
Delete Bars Move System Objects
Version 01.90.00
Added 20 Mar 2012 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Deletes all the bars in a passage selection of full bars, after moving any system objects attached to the first selected bar to the bar following the deleted bars. It will retain a title page if the first bar in the score is deleted.
- Download DeleteBarsMoveSystemObjects.zip (8K, downloaded 27229 times)
Plug-in written by Bob Zawalich.
Systems Per Page
Version 01.09.00
Added 26 Mar 2012 (last updated 29 May 2018)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Lays out a score so that there are a specified number of systems on a page without changing the number of bars in a system.
If the format is not locked, the number of systems chosen may not fit on a page. Use ''Lock format'' to make the number of systems into a page.
It is simpler if the selected bars are at the start of a page; otherwise, the first changed page starts at the first bar of the original page containing the first selected bar.
Options chosen in the dialog will be preserved over Sibelius sessions.
Updated 28 May 2018. Internal cleanup; multirest handling improvements.
- Download SystemsPerPage.zip (8K, downloaded 28115 times)
Plug-in written by Bob Zawalich.
Reset Position Independent
Version 01.06.00
Added 18 May 2012 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Resets Position of selected objects. The trick is that it can reset the horizontal and vertical positions independently, so you can reset one without resetting the other.
So you could, for example, realign sets of lyrics vertically without losing manual horizontal adjustments.
This plugin is dedicated to Robert Puff, in part because it was so easy to do.
- Download ResetPositionIndependent.zip (3K, downloaded 27192 times)
Plug-in written by Bob Zawalich.
Proportional Note Spacing
Version 01.54.00
Added 22 May 2012 (last updated 28 Aug 2018)
For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Sets the notes in a selection or score to use proportional note spacing, where the spacing corresponds to the duration of the note, or restores the notes to default spacing.
If the entire score is selected, the Proportional Spacing will become the default for the score; otherwise, only the selection is changed and respaced, and the defaults for the score return to the original Note Spacing settings.
Updated 28 August 2018. Version 01.54.00. Removed adjustment that caused values to be rounded incorrectly and could add incorrect cumulative spacing offsets.
- Download ProportionalNoteSpacing.zip (9K, downloaded 28222 times)
Plug-in written by Bob Zawalich.
Double Barline at Time Signature
Version 01.05.00
Added 10 Aug 2012 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Given a passage (box) selection, which does not need to be a system (purple box) selection, the plugin will add a double barline before any time signature changes.
- Download DoubleBarlineAtTimeSignature.zip (3K, downloaded 27225 times)
Plug-in written by Bob Zawalich.
Show Staves In Parts Only
Version 01.06.20
Added 27 Sep 2012 (last updated 07 Mar 2014)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Sets selected staves to show only in parts.
You need to make a passage (box) selection of the staves that you would like to hide. You only need to select a single bar, as the plugin will select the entire staff.
The plugin will make all objects in the selected staves appear only in parts. In Sibelius version 7.1.3, the staves will be hidden with Hide Empty Staves. In earlier versions of Sibelius, they remain selected, and you can the use Hide Empty Staves to hide the staves in the score.
- Download ShowStavesInPartsOnly.zip (4K, downloaded 27232 times)
Plug-in written by Bob Zawalich.
Hide Empty Staves Grand Staff
Version 01.06.00
Added 27 Sep 2012 (last updated 21 Feb 2020)
For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
For Sibelius version 7.1.3 and later only
Hides empty staves that are included in a passage selection. For instruments that are defined as having more than 1 staff (pianos, harps, etc) it will only hide empty staves if both staves are empty. (Sibelius itself hides all empty staves even for grand staff instruments).
If there is already a hidden staff for such an instrument that has another unhidden staff, the hidden staff will be unhidden.
There is no dialog for this plugin; it is intended to be a replacement for Hide Empty Staves when using instruments like a piano, and other than its special feature, it should act the same as Hide Empty Staves.
Updated 28 May 2018. Version 01.06.00. Multirest problem cleanup.
- Download HideEmptyStavesGrandStaff.zip (6K, downloaded 27422 times)
Plug-in written by Bob Zawalich.
Delete Leading Empty Bars
Version 01.80.00
Added 18 Feb 2014 (last updated 06 May 2020)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This plug-in will delete empty bars from the start of the score up to a specified stopping point.
Before deleting, it moves any system objects, such as Title text, from the bar(s) to be deleted to the first bar that is not deleted. A title page will be preserved.
Only use the ''Delete bars before bar number'' option if bars numbers are always ascending.
There are some options to determine what the plugin will consider to be an empty bar.
This plugin was written to help with the large number of empty bars that can be added to a score when transferring from Pro Tools to Sibelius.
Updated 2 April 2018 Internal changes only.
As of 6 April 2020, this plugin has been replaced by Delete Leading or Trailing Empty Bars.
- Download DeleteLeadingEmptyBars.zip (11K, downloaded 27288 times)
Plug-in written by Bob Zawalich.
Gap Before Bar
Version 01.65.00
Added 10 Mar 2014 (last updated 04 Jul 2023)
For use with Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__Optionally traces bars that contain non-zero gaps before bars, or resets such gaps to zero. Can process the current score, all open scores, or a folder of scores. __The entire score is always processed, regardless of selection. To reset specific gaps, run the plugin to trace the location, and reset manually with the Inspector. __The plugins requires Sibelius 7.5 or later. __Updated 21 May 2019 Version 01.61.00.Redid the dialog. When running on the current score the plugin will process only the bars in a passage selection; in other cases it will always process the entire score. You can now reset Gap Before and Gap After to zero separately, and can change the values of Gap Before or Gap After for the first selected bar in each system when multiple staves are selected in a passage selection. A PDF explaining how this works in detail will be downloaded when the plugin is installed. Most of the PDF information is available using the Help button. __Updated 28 August 2019. Version 01.63.00. Added the ability to process parts within a score, since changing the gaps in the full score does not affect parts and vice versa. Also added an option to indent (using Gap Before) at the start of a score and at the start of each movement, as indicated by some options. PDF and Help explain details. __Updated 4 July 2023. Version 01.65.00. Will process score subsets correctly in Sibelius Ultimate 2023.6 or later.- Download GapBeforeBar.zip (285K, downloaded 1212 times)
Plug-in written by Bob Zawalich.
Map Pages
Version 01.41.00
Added 14 May 2014 (last updated 12 Jan 2017)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Makes an overview of a score, creating a list of the bar numbers for each page, the bars in each system on the page, and the number of visible staves in each system and each page.
A "View" button will bring the first bar of a chosen page or system into view, so you can inspect various pages from the plugin dialog.
This can provide a sense of which pages are densely populated, and which ones are light.
Updated 17 Feb 2015. Fixed bug where hidden system was reporting 0 staves when really 1 was showing. Added score name and part name to data.
Updated 17 December 2015. Added score total and ability to hide dialog so that all output is traced. Plus made dialog smaller to fit laptop screens better.
Updated 19 December 2015 to make the plugin work more smoothly when run from Run Plugin On Score and Parts. A few more options were added.
Updated 27 February 2016 to include total pages and blank pages in score totals and add explanations.
Updated 12 January 2016. Fixed bug where View for last page went to page 1. Improved View placement so entire pages should be visible unless the final few bars are chosen.
- Download MapPages.zip (11K, downloaded 27166 times)
Plug-in written by Bob Zawalich.
Hide Staves and Music
Version 01.86.00
Added 31 Jul 2014 (last updated 30 May 2019)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Hides the staves for all selected bars in a passage selection by creating an instrument change to Hidden no lines. It can also hide staff objects. By default it will hide the music in the staff (notes, rests, bar rests, tuplets, slurs, trills, and arpeggio lines), while leaving other text visible.
The plugin allows text attached to a staff to be visible while the staff itself is hidden, allowing the text to retain the spacing of the attached notes. It can be useful for tonic-sol-fa notation, or solfege, or for showing chord symbols and lyrics without notes.
This plugin is dedicated to Mary McGuyer.
Updated 8 December 2017. In Sib 7.1.3, you can now use Hide Empty Staves to hide the staves instead of an instrument change. You will need to hide all staff objects for this to work.
Updated 30 May 2019. Version 01.86.00. Added option to hide Lyrics separately, and option to hide staves with barlines shown.
- Download HideStavesAndMusic.zip (6K, downloaded 27751 times)
Plug-in written by Bob Zawalich.
Tidy Score
Version 1.1
Added 11 Aug 2014 (last updated 17 Jun 2015)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This plugin runs a number of Sibelius options which tidy up and optimise the appearance of a score.
It may be necessary to drag the first stave down to make space for the title after running it, but overall it should improve the overall appearance. If the effect is not what is desired, then it is, of course, undoable.
It does the same as the following commands in Sibelius 7 (and their equivalent in Sibelius 6):
- Layout > Reset Space Above
- Layout > Reset Space Below
- Appearance > Reset > Position
- Appearance > Reset Note Spacing
- Layout > Optimize
- Download TidyScore.zip (1K, downloaded 27608 times)
Plug-in written by Kenneth Gaw.
Move Time Sig Repeat Barline
Version 01.20.00
Added 17 Jun 2015 (last updated 01 Apr 2016)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
When you have a bar that has both a start repeat barline and a time signature, Sibelius put them in the wrong order. The time signature should appear before the barline, but the barline appears first.
The usual way to fix this is to shift the positions of the time signature and barline using horizontal offsets, as in the Inspector. This plugin automates this process, and it can perform the shift i the main score and/or in all the parts.
The shifts will be lost if you perform Reset Position on the bars that have been modified. so do not do that if you can avoid it.
Updated 1 April 2016 to fix missing TrimBlanks for Sib 6.
- Download MoveTimeSigRepeatBarline.zip (7K, downloaded 27304 times)
Plug-in written by Bob Zawalich.
Add Bar Before Special Barline
Version 01.06.00
Added 22 Nov 2015 (last updated )
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Add Bar Before Special Barline does what Home - Bars - Add Bar At End or Home - Bars - Add Single Bar does, except that if the bar at the end of the selection ends with a Special Barline, that barline is moved to the added bar. If there is no selection, the added bar is appended to the score. If there is no special barline, the plugin behaves the same way Sibelius does. It can act as a replacement for these Sibelius commands.
The visual effect is that the added bar slips in before the special barline, whereas, when adding a bar in Sibelius itself, an added bar will always be added after the special barline, even at the end of the score.
No system data except the special barline is moved; the added bar is always the size that corresponds to the time signature. The plugin runs with no dialog.
- Download AddBarBeforeSpecialBarline.zip (3K, downloaded 27440 times)
Plug-in written by Bob Zawalich.
Adjust Start Repeat Barline
Version 01.14.00
Added 10 Sep 2016 (last updated 10 Sep 2016)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
Looks for Start Repeat barlines at the start of a bar, which are preceded by a visible Key Signature but not a Time Signature. You can add horizontal offsets to such barlines to give more space between the barline and Key Signature. These offsets will be removed if you reset note spacing so run the plugin late in your layout process.
You can also just trace the locations of potentially mispositioned barlines without changing any.
All potentially mispositioned barlines will be selected at the end of the plugin. You can use the Selected Objects option of the Go To plugin to browse among the selected barlines.
This was written to correct key signature and start repeat barline conflicts in Sibelius 8.4.2. These are most pronounced in fonts like Inkpen2 and Reprise and in flat keys.
- Download AdjustStartRepeatBarline.zip (12K, downloaded 27273 times)
Plug-in written by Bob Zawalich.
Lock or Unlock Score and Parts
Version 02.08.00
Added 06 Sep 2017 (last updated 01 Apr 2024)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__Does the equivalent of Lock Format or Unlock Format to a full score and/or all the parts in a score, or a folder of scores. If both the score and parts are processed, the parts are processed before the score, which prevents changes in the score (especially breaks in multirests) from affecting the layout of the parts. __Like the Lock Format command it does not prevent notes from being moved, it just sets up breaks on bars to restrict layout changes. __When locking, the plugin will add breaks to bars at the ends of systems so that the current page layout is retained. __When unlocking, the plugin sets all bar breaks to default breaks. __Special Page Breaks, Split Multirests, Split Systems and Section Ends are not changed. __Updated 8 December 2017. The folder and open scores options are now functional. __Updated 14 May 2018. Added ability to change page breaks to system breaks in score and parts. __Updated 6 December 2022. Version 02.06.00. Fixed crashing bug in Unlock Format. __Updated 02 September 2023. Version 02.07.00. Adapted for subsets. __Updated 01 April 2024. Version 02.08.00. Bug fixes, New Help button, New option to remove System Breaks only.- Download LockUnlockScoreAndParts.zip (14K, downloaded 677 times)
Plug-in written by Bob Zawalich.
Hide In All
Version 01.06.00
Added 13 May 2018 (last updated 04 Jul 2023)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__This is a counterpart to the Sibelius Show In All command. It hides score objects in the full score and in all parts, whether the plugin is run in a full score or a part. __This can be useful if objects had been hidden in a part rather than in the full score, and had only been hidden in that part, or if the hidden state of objects is different in the score and in the parts. __You can hide all selected objects, all selected objects that are already hidden, or all objects that are already hidden in the full score and/or all parts. __Most of the options are intended to help repair inconsistent hidden states of objects in scores and parts. __Updated 4 July 2023 Version 01.06.00. Processes score subsets correctly in Sibelius Ultimate 2023.6 or later.- Download HideInAll.zip (8K, downloaded 1008 times)
Plug-in written by Bob Zawalich.
Delete Leading Or Trailing Empty Bars
Version 01.90.00
Added 06 May 2020 (last updated 06 May 2020)
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
This is an upgrade to and replacement of the plugin Delete Leading Empty Bars, adding the ability to delete empty trailing bars (empty bars at the end of the score). Original version 01.90.00.
The description of the original Delete Leading Empty Bars plugin follows.
This plug-in will delete empty bars from the start of the score up to a specified stopping point.
Before deleting, it moves any system objects, such as Title text, from the bar(s) to be deleted to the first bar that is not deleted. A title page will be preserved.
Only use the ''Delete bars before bar number'' option if bars numbers are always ascending.
There are some options to determine what the plugin will consider to be an empty bar.
This plugin was written to help with the large number of empty bars that can be added to a score when transferring from Pro Tools to Sibelius.
- Download DeleteLeadingOrTrailingEmptyBars.zip (12K, downloaded 27315 times)
Plug-in written by Bob Zawalich.
System Break At Final Barline And Section End
Version 01.08.00
Added 02 Dec 2022 (last updated )
For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x
__System Break At Final Barline And Section End adds system breaks at the ends of bars that contain final barlines, double barlines, and/or section ends, for a full score and/or all of its parts. __This plugin was commissioned by and is dedicated to Philip Rothman. __Originally added 2 December 2022. Version 01.08.00.- Download SystemBreakAtFinalBarlineAndSectionEnd.zip (7K, downloaded 1368 times)
Plug-in written by Bob Zawalich.
Categories
- Accidentals (9) »
- Arrange (2) »
- Analysis (2) »
- Batch Processing (22) »
- Color (12) »
- Composing Tools (41) »
- Layout (46)
- Menus and shortcuts (4) »
- Notes and rests (72) »
- Other (45) »
- Playback (25) »
- Proof-reading (6) »
- Text (98) »
- Navigation (13) »
- Filter and Find (54) »
- Chord Symbols (11) »
- Note Input (4) »
- Lines (18) »
- Simplify Notation (2) »
- Focus On Staves (2) »
- Comments (2) »
- Harp (14) »
- Transformations (7) »
- Hitpoints (3) »
- Guitar (6) »
- Banjo (3) »
- Selection (10) »
- Developers' Tools (32) »
- Engravers' Tools (45) »
- Tuplets (4) »
- Sight-impaired (10) »
- Accessibility (1) »
Find plugins by Sibelius version